Project "DireSnake Bomb"

  DECOR
  Well, there left to make the decor and illumination, as entire existing illumination consisted of light fans and two decor-panels of black acryl, which have been pasted with glue to external disks. With the help of sandpaper the internal side of these disks was toned, and 8 mm tube of thermocontraction was pasted by internal diameter, which densely pressed the grid. Eight blue 3 mm light-emitting diodes of increased brightness have been placed in formed internal groove, which made at once the text easily readable and brightly illuminated contours of the case. As I refused installation of two 120 mm fans so it was possible to use somehow spare holders. 7 cm piece of a transparent aquarian tube (light green color) has been pasted on each of them, in which white 3 mm light-emitting diodes were inserted into two sides. Power cables of light were led to one place under motherboard where power splitter was assembled. Lateral disks fixed with 4 mm bolts with cap nut. In order to decorate the grid somehow I drew on it the figure of snake on the background of radiation sign by means of permanent marker.