Project "O3-Station"

   But installation of the majority of rheobuses or multipanels will be impossible due to very small distance between front panel and the door – it is worthwhile to concern not only selection of color of the panel - but also its external dimensions. Similarly because of small size of the space the effectiveness of the front grid is considerably reduced, and at closed door the front fan, in case of installation, starts to suck in the air through the small aperture in the bottom of the front panel... and naturally except air there gets the dust. 
   Well. We shall start disassembly. Unlock the locks on two lateral panels and remove them with accurate movement. We remove right panel at once aside for it represents nothing special naturally. And then further....
   Inside the case we find out a little panel for motherboard (as if all of them are identical), power lead and the big bag of fine accessories: fastening bolts, screwed carriage for drives and plugs (!) of unused PCI-slots. So it is not necessary to break anything out here. More likely - on the contrary it would be necessary to fasten. The case itself has support on qualitatively made plastic legs fastened to the case with bolts. The legs have not only a decorative steel ringlet but also an unexpected rubber ringlet which rather well clings to the table and damps vibration. At the bottom of the case there have been found the seal “Product is certificated” - that should please. By the way, the top panel is installed not on rivets but on two bolts so nothing would hamper to remove it and to mock at ;).