Custom Case "WoodBox"

   The arrangement of components in a compartment of power unit. The power unit was placed turned upside down under the motherboard. Air, flowing through the power unit is blown in a bottom of the cube by 120 mm cooler. There was found a place for cheap compressor in the power unit, however I decided not experimenting with its connection to common power supply and simply led its cable from the case, having had an opportunity to switch it off when necessary.

   One of IDE-cables of power supply was not disconnected and transferred to the socket so it together with cables of motherboard power supply leaves the power unit. Below them there are sockets of devices power supply and pasted socket of water-block power supply (+3V taken from SATA).

   Back wall with cut apertures for motherboard and expansion boards. Socket for 220V power cable is in the center of power unit. Two grids of old cheap speakers have turned into the protective grid.