У меня такая же ошибка выскакивает в Виндовсе на синем Экране после чего рестарт происходит.
после это синего экрана в биосе сбрасывается последовательность загрузки винчестеров и винчестер САТ не определяется - временно.
Возил в ремонт ничего не определили, все в норме, завтра опять повезу, комп новый месяца еще нет.
Maxman, как ты решил свою проблему?
_____________________
вот что у меня, идентичная твоей:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
KERNEL_DATA_INPAGE_ERROR
If this is the first time you`ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation. Ask your hardware or software manufacturer for any windows updates you night need.
If problems continue, disable or remove any newly Installed hardware or software. Disable BIOS memory options such as caching or shadowing. if you need to use safe Mode to remove or disable computers. restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode
Technical Information:
*** STOP: 0x00000007A (0xE1657928. 0xC0000000E. 0x8F91C16B. 0x00AEE860)
*** win32.sys – Address BF91C16B base at BF800000. DateStamp 43446a58
Beginning dump of physical memory
_____________________
еще вроде похожая ошибка...но если приглядеться то другая
_____________________
A problem has been detected and Windows has been shut down to prevent damage to your computer.
KERNEL_STACK_INPAGE_ERROR
If this is the first time you`ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation. Ask your hardware or software manufacturer for any windows updates you night need.
If problems continue, disable or remove any newly Installed hardware or software. Disable BIOS memory options such as caching or shadowing. if you need to use safe Mode to remove or disable computers. restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode
Technical Information:
*** STOP: 0x00000007 (0xC0000000E. 0xC0000000E. 0x0000000. 0x00416000)
Beginning dump of physical memory